Installation Requirements for Construction Waste Chute Safety Protection

The construction waste chute is a high-altitude vertical transportation device; safety protection is of utmost importance. This article details the installation requirements for safety protection.

1. Fall Protection
2. Chute Fixing Protection

• One fixing point every 3–4 m
• Fixing points firm and reliable
• Prevent chute falling
• Daily inspection

2. Section Connection Protection

• Buckles locked tight
• Optional safety pins (high-rise)
• Prevent joint separation
• Periodically inspect buckle bolts

3. Bottom Protection

• Chute bottom connects to the collection hopper
• Not suspended
• Prevent injury from falling waste/objects
• Provide protective canopy at the bottom

1. Blockage Prevention
2. Feed Grating

• Block oversized pieces
• Prevent blockage
• Grating spacing = 60% of diameter

2. Inspection Opening

• Provide an inspection section every 30 m
• Can be cleared when blocked
• Must be provided at bends

3. Chute Flow

No sharp right-angle bends

Buffer section angle ≥30°

Periodically inspect flow condition

III. Splash Protection

1. Feed Inlet Protection

Movable door

Observation window

Protective mesh

Close door after loading

2. Joint Protection

Sealing ring

No dust leakage

Periodic inspection

3. Bottom Protection

Enclosed discharge

Buffering hopper

Warning zone

1. Warning Signs
2. Chute Signs

Apply "Caution: Falling Objects" every 10 m

Apply "No Climbing"

Apply "Construction Waste Chute"

2. Feed Inlet Signs

"Construction Waste Feed Inlet"

"Loading: Mind Safety"

Operating instructions

3. Bottom Signs

"Danger, Keep Away"

"Falling Objects Area"

Warning lights at night

1. Electrical Safety (Electric Type)

Ground dust removal equipment

Overhead cables

Leakage protection

Comply with temporary electricity regulations

1. Lightning Protection

Ground high-rise chute

Grounding resistance ≤10Ω

Prevent lightning strikes

VII. Safety Inspection

Daily:

Chute appearance

Connectors

Fixing points

Feed inlet door

Bottom condition

Weekly:

Sealing rings

Buffer sections

Anchor bolts

Warning signs

Monthly:

Comprehensive inspection

Chute verticality

Fixing point loads

Wear parts

VIII. Longkang Safety Configuration

Supply matching warning sign stickers

Can provide safety pins

Provide safe operation manual

Installation safety briefing

Safety training