Demolition works of old buildings involve large waste volume, large block size, and strong impact, imposing higher requirements on the chute. The Longkang HDPE Heavy-duty construction waste chute is suitable for demolition works. This article introduces its application.
Large waste volume: 30–50 m³ daily throughput
Large block size: concrete blocks up to 300–450 mm
Strong impact: large blocks cause heavy impact on falling
Unstable structure: the structure changes at any time during demolition
Tight schedule: demolition works require speed
Diameter: 600 mm Heavy-duty
Wall thickness: 10–12 mm
Per-section load capacity: over 800 kg
Wear-resistant HDPE
Buffer section every 15 m
Double-layer buffering at the bottom
Wear-resistant lining on inner wall
Chemical anchors anchored into the structure
One fixing point every 3 m
Triangular bracket reinforcement
Grid installed at the feed inlet (to intercept oversized blocks)
Sealed feed inlet door
Protective mesh
III. Coordination with Demolition Process
Top-down demolition: the pipeline extends downward along with demolition progress
Feed inlet on each floor: demolition and feeding proceed floor by floor
Continuous bottom clearance: equipped with collection hopper + clearance truck
Demolition and clearing simultaneously: waste does not accumulate
As the structure changes during demolition, fixing points must be inspected frequently
Prevent blockage by large blocks
Warning zone set up at the bottom
Inspect pipeline integrity daily
Replace damaged sections immediately upon discovery
Manual demolition: the chute operates efficiently
Mechanical demolition: large blocks handled by machinery, small blocks go through the chute
After crushing: concrete blocks crushed below 400 mm go through the chute
High efficiency: 5 times faster than tower crane lifting
Low cost: reduces machinery shifts
Safe: prevents objects falling from height
Eco-friendly: sealed conveyance reduces dust
Durable: Heavy-duty model adapts to strong impact
VII. Longkang Demolition Works Service
Longkang provides for demolition works:
Heavy-duty dedicated equipment
Wear-resistant lining accessories
Gridded feed inlet
Quick installation
On-site technical support