Guide to Replacing Construction Waste Chute Wear Parts

Construction waste chutes have several wear parts that require regular replacement. This article lists the wear parts checklist and replacement guide.

1. Wear Parts Checklist

1. Sealing Ring Replacement
2. Replacement Cycle

Generally 1–2 years

Replace when dust leakage is found

Inspect and replace before winter

2. Replacement Method

Disassemble the joint

Remove the old sealing ring

Clean the seal groove

Insert the new sealing ring

Align the joint

Fasten and tighten the buckle

3. Sealing Ring Specifications

EPDM material

Cross-section Φ8 mm

According to pipe diameter circumference

III. Buffer Section Replacement

1. Replacement Criteria

Wall thickness wear exceeding 30%

Pits or cracks appear

Buffering effect decreases

2. Replacement Method

Disconnect the upper and lower joints of the buffer section

Remove the old buffer section

Install the new buffer section (correct orientation)

Seal the joint

Secure firmly

1. Bottom Discharge Section Replacement
2. Replacement Criteria

Bottom section severely worn

Holes appear

Poor buffering effect

2. Replacement Method

Stop use

Disconnect the bottom section joint

Install the new section

Adjust discharge direction

Check sealing

1. Feed Inlet Door Replacement
2. Sealing Strip Replacement

Replace when aged and hardened

Install new sealing strip

2. Hinge Replacement

Replace when hard to open/close

Remove old hinge and install new one

3. Full Door Replacement

Replace the whole door when severely deformed

1. Buckle Replacement

Replace when severely corroded

Replace when threads slip

2 per joint

Stainless steel buckles have longer life

VII. Wear Parts Procurement

Purchase according to pipe diameter specifications

Longkang keeps regular stock

Recommended to keep 10%–20% spares

Sealing rings recommended in regular stock

Purchase buffer sections according to wear plan

VIII. Longkang Wear Parts Supply

Long-term supply of all wear parts

Complete specifications

Fast shipping

Technical guidance on replacement

Free replacement within warranty period